Reliable electrical systems are essential for onboard safety and daily operations. We specialize in repair, troubleshooting, and restoration of marine electrical and power systems for yachts and commercial vessels, focusing on fast diagnostics and practical solutions rather than unnecessary upgrades. Our work begins where problems appear: power failures, alarms, instability, and aging installations, often in complex or legacy systems.

Electrical Repairs & Fault Finding

We identify and resolve electrical issues efficiently, including power loss, tripping breakers, voltage fluctuations, short circuits, insulation failures, grounding problems, overheating cables, corroded connections, and emergency electrical faults. Diagnosis is always aimed at identifying the true root cause, not applying temporary fixes.

Power Systems Maintenance & Recovery

When electrical systems underperform or fail, we restore them to safe and reliable operation. This includes generator electrical repairs and control issues, battery bank testing and reconfiguration, troubleshooting of chargers, inverters, and power converters, as well as repairs to switchboards, panels, protection devices, and emergency backup systems.

Cabling, Connections & Compliance

Many electrical problems originate from degraded wiring and poor terminations. We carry out targeted rewiring and cable repairs, termination and labeling cleanup, corrosion and moisture damage remediation, and electrical safety inspections required for surveys and insurance.

We provide diagnosis, repair, maintenance, and optimization of onboard HVAC and refrigeration systems, focusing on restoring performance and reliability of existing installations, rather than designing complete systems from scratch.

Our services include:

• Troubleshooting of air conditioning, chillers, and refrigeration units
• Repair of compressors, pumps, valves, blowers, and control components
• Detection and correction of refrigerant leaks, pressure imbalances, and flow restrictions
• Electrical and control fault-finding affecting HVAC operation
• Optimization of airflow, cooling efficiency, and temperature stability
• Service of marine refrigeration systems for provisions, cold rooms, and freezers

We primarily intervene on systems already installed onboard, identifying root causes such as component wear, fouling, improper calibration, electrical faults, or installation-related inefficiencies.

The objective is stable climate control, reduced energy consumption, and minimized downtime, using practical solutions suited to continuous marine operation and harsh environmental conditions.

We provide diagnosis, repair, troubleshooting, and optimization of onboard automation, control, and monitoring systems, with a strong focus on maintaining and restoring existing installations.

In addition to service and fault-finding, we also design and build complete monitoring and automation systems from scratch, using Maretron as our preferred platform for reliable, modular, and scalable solutions.

Our services include:

• Fault-finding on PLC-based systems, control units, and monitoring panels
• Troubleshooting of alarm systems, sensors, actuators, and I/O modules
• Resolution of communication failures between automation systems and vessel subsystems
• Repair and configuration of monitoring, data acquisition, and control interfaces
• Calibration and validation of sensors for pressure, temperature, levels, and machinery status
• Design and implementation of custom Maretron-based monitoring and automation architectures, from sensor level to displays and alarms

We typically intervene on existing automation systems, isolating issues caused by sensor drift, wiring faults, configuration or logic errors, environmental exposure, or component aging.

When required, we deliver new automation and monitoring systems, tailored to the vessel’s operational profile and integrated seamlessly with onboard networks.

We provide diagnosis, repair, servicing, and optimization of onboard stabilizers, thrusters, and motion control systems, with a strong focus on restoring performance and reliability of existing installations.

Our services include:

• Troubleshooting and repair of fin stabilizers, gyro stabilizers, and control units
• Service and fault-finding on bow and stern thrusters, including hydraulic and electric systems
• Diagnosis of motion control failures, response delays, and control instability
• Repair and calibration of sensors, feedback systems, and control interfaces
• Resolution of power, hydraulic, and signal-related faults affecting system performance
• Integration and tuning of stabilizers and thrusters with onboard control and monitoring systems

We typically intervene on installed systems, identifying root causes such as hydraulic leaks, electrical faults, sensor drift, control logic errors, mechanical wear, or improper calibration.

The objective is improved vessel handling, reduced roll and yaw, and predictable maneuvering, ensuring comfort, safety, and operational confidence both underway and during low-speed or harbor operations.

We provide diagnosis, repair, servicing, and optimization of onboard hydraulic systems, focusing on restoring reliability and performance of existing installations, rather than full system redesign.

Our work covers hydraulic systems supporting stabilizers, thrusters, and steering systems, as well as winches, cranes, and deck machinery used in daily vessel operations. We also service gangways, platforms, and lifting equipment, addressing issues related to motion control, load handling, and operational safety.

Our services include troubleshooting and repair of hydraulic pumps, motors, valves, manifolds, and actuators, diagnosis of pressure loss, flow instability, overheating, and contamination, and repair or replacement of hoses, pipes, seals, and fittings. We intervene on integrated hydraulic power units (HPUs), resolving faults affecting power delivery, control accuracy, and system efficiency.

We primarily work on installed hydraulic systems, isolating root causes such as component wear, contamination, electrical control faults, improper calibration, or installation-related deficiencies.

The objective is smooth, predictable hydraulic operation, reduced downtime, and safe load handling, ensuring critical onboard systems perform reliably under continuous marine use and demanding operational conditions.

We provide diagnosis, repair, servicing, and fault isolation of onboard auxiliary machinery that supports vessel operations, with a focus on reliability, mechanical integrity, and safe system interaction.

Our work covers:

• Seawater and freshwater pumps, including circulation, transfer, and service duties
• Fuel transfer and service systems, addressing flow, priming, leakage, and control issues
• Bilge and ballast systems, including valves, pumps, sensors, and level control
• Air compressors and pneumatic equipment, with attention to pressure stability and air quality
• Freshwater makers and treatment units, troubleshooting production, pressure, and control faults
• Motors, couplings, and bearings, including alignment, vibration, and wear-related failures
• Control and safety interlocks, ensuring correct system sequencing and protective responses

We routinely address issues such as overheating, abnormal vibration and noise, electrical supply and protection faults, and failures caused by mechanical wear, misalignment, or prolonged operation under improper conditions.

Interventions are typically carried out on existing installations, restoring dependable operation by identifying root causes rather than treating symptoms.

We provide inspection, diagnosis, repair, and reinforcement of composite structures and fiberglass components, focusing on restoring structural integrity and long-term reliability of existing vessels rather than cosmetic-only work.

Our services include:

• Structural assessment of fiberglass, GRP, carbon fiber, and sandwich constructions
• Repair of laminate damage, delamination, cracks, and impact areas
• Reinforcement of high-load zones such as stringers, bulkheads, frames, and attachment points
• Diagnosis and remediation of water ingress, core degradation, and osmotic issues
• Structural repairs around through-hulls, shafts, stabilizers, thrusters, and deck hardware
• Alignment and repair of composite structures affected by stress, fatigue, or improper installation

We work primarily on existing composite structures, identifying root causes such as structural fatigue, water intrusion, poor load distribution, or previous inadequate repairs, and applying engineered solutions suited to the vessel’s operating profile.

The objective is structural soundness, durability, and safety, ensuring composite components perform reliably under real marine loads and environmental conditions, without unnecessary replacement or overbuilding.

We provide inspection, preparation, repair, and application of protective coatings and surface treatments, focusing on long-term protection and performance rather than cosmetic finishes alone.

Our services include:

• Assessment and repair of damaged or degraded coatings on hulls, decks, superstructures, and machinery spaces
• Surface preparation, including mechanical cleaning, sanding, blasting, and substrate conditioning
• Application and repair of protective, anti-corrosion, and marine-grade coating systems
• Treatment of metal, composite, and mixed-material surfaces exposed to harsh marine environments
• Identification and correction of coating failures caused by poor adhesion, contamination, moisture ingress, or improper application
• Protection of critical areas subject to corrosion, abrasion, UV exposure, and chemical attack

We typically intervene on existing surfaces, restoring protective function by addressing root causes such as substrate degradation, inadequate preparation, environmental exposure, or previous coating system failure.

The objective is effective corrosion protection, surface durability, and reduced maintenance cycles, ensuring onboard structures and components remain protected and serviceable under continuous marine operating conditions.

We provide independent technical consultancy and advisory services to support owners, captains, managers, and operators in technical decision-making, risk assessment, and operational planning.

Our advisory work includes:

• Technical assessments and condition reviews of vessels and onboard systems
• Support during pre-purchase inspections, refits, upgrades, and system modifications
• Evaluation of repair strategies, technical solutions, and cost-benefit trade-offs
• Assistance in fault escalation cases, recurring failures, and complex troubleshooting scenarios
• Technical liaison between owners, crew, shipyards, suppliers, and surveyors
• Review of technical documentation, system layouts, and operational procedures

We provide clear, experience-based guidance, grounded in hands-on technical knowledge rather than theoretical assumptions, helping clients make informed decisions under real-world constraints.

The objective is clarity, risk reduction, and technical confidence, ensuring that technical choices are sound, proportionate, and aligned with the vessel’s operational needs, budget, and long-term reliability.